Component parts of a safer test cutting sword.
Moderators:Scott M. Rodell, PaulC
Although there are many signs that a sword may or may not be good for test cutting, one of the best ways to judge any tool is also by taking it apart. Is there someone who is willing to either take apart a good cutting sword to describe and illustrate, hopefully with photos, all the parts of a good sword from the blade to the furniture? Additionally, if anyone has pieces from good examples, that serves much of the same purpose.
-
- Site Admin
- Posts:1364
- Joined:Wed Jan 28, 2004 4:50 pm
- Location:Virginia
- Contact:
Re: Component parts of a safer test cutting sword.
I'm afraid a visual inspection alone of a sword, even disassembled, isn't sufficient to determine if a sword is strong enough for cutting practice. The reason is, for example, the tang might look thick enough, but you can't see what kind of steel it is, or if there are internal forging flaws. So every sword one intents to use for test cutting should undergo a through Structural Integrity Test (I cover how to do this in my book- http://www.sevenstarstrading.com/html/b ... ttingbook/ ).xingyi24 wrote:... ways to judge any tool is also by taking it apart ...
Re: Component parts of a safer test cutting sword.
So I see... After I opened this post I had a jian that looked totally safe bend so the tip is three inches off center when doing full speed, or maybe only most speed, xingyi jian forms. It wasn't side to side either. It leaned forward, toward an edge. There was no cutting even involved. I guess I have more to learn about metalurgy, and that's why we need to listen to professionals like Mr. Rodell and other non-marketers when it comes to safe(er) training tools.